Metal Forming
Metal Forming - Single Piece Dished Ends
Shape/Type: 2:1 Ellipsoidal Dished End / Size X THK. - 2450 MM. Id. X 40 Min THK.
Owing to our domain expertise, we are able to undertake fabrication of Single Piece Dished End. By adopting cold and hot forming process, these dished ends are fabricated. Different capacity of hydraulic presses and spinning machines are used for the fabrication process that adhere to the international norms. These dished end are application specific and can be developed in various forms.
Metal Forming - Segmental Construction
Shape/Type: 2:1 Ellipsoidal Dished End / Size X THK. - 16300MM I.D. X 50/75 MM THK.
A Segmental Construction is a process built in short sections (called segments), that is one piece at a time. And then segments are joint together at a later process. The pieces in process can be either cast-in-place or precast.
Metal Forming - Toricones
Shape/Type:Toricone / Size X THK. - 9996 MM Big I/D & 8245 MM Small ID X 2605HT
Metal Forming - Flanged & Flued Joints
Shape/Type: Flanged & Flued Joints / Size X THK. - 3392 I.D.1X 2900 I.D. 2 X 40 THK
Flanged and Flued Joints typically have higher stiffness and absorb less axial deflection comparatively. Flanged and Flued joints are made in two halves from flat annular plates. The outside edges of the plates are formed in one direction (flanged), and the inside edges are formed in the other direction (flued). The two halves are welded together and then welded into the heat exchanger shell.